LED NeonPRO RGB Custom flex stripe B13H10 for tile profiles, 24V DC, 10W, 300cm, IP67, 140 LED/m
Article is located in the inlet, please contact the internal sales team
Article number
116293
| Article number | 116293 |
|---|---|
| Product description | LED NeonPRO RGB Custom flex stripe B13H10 for tile profiles, 24V DC, 10W, 300cm, IP67, 140 LED/m |
| GTIN - EAN | 9009377156687 |
| Special features | Separation point: 50mm with 7 SMD each | Pitch (light point center-center): 7,14mm | 1 unit (roll) = 3m | max. flex stripe length per feed: 5m | length tolerance + thermal expansion: 1% | no cooling profile required | without adhesive tape! | silicone potting | SPECIAL FEATURE: 30cm 2-pole sheathed cable one-sided, white, connection on the side, open stranded wire without MiniAmp connector | NOTE: in width and height 2x1mm applying end caps, vertically bendable (bending radius min. 60mm) |
| Nominal voltage | 24 V DC |
| Rated power | 10 W/m |
| Active power | 10 W/m |
| RGB light source | Yes |
| CRI Ra | 80 |
| Beam angle | 120° |
| Pitch SMD (mm) | 7.14 |
| Max. length per feed (m) | 5,0 |
| Required cooling mass | 0 |
| Type de ruban adhésif | ohne Klebeband |
| Protection class | IP67 |
| Outdoor | Y |
| Permissible ambient temp. | -20°C - 40°C |
| Housing material | Silicone |
| Length in mm | 3000,0 |
| Width in mm | 13,0 |
| Height in mm | 10,0 |
| Lifetime L70|B10 | 38000 |
| Guarantee in years | 3 |
| Excess lengths | N |